Dump Truck Bodies

Tailgate Standard Features

• Constructed with 10 ga. steel
• Fully boxed frame with two 12 ga. vertical posts
• Standard height — 6″ higher than sides
• Fully double-acting with bottom release lever at driver’s side, upper release is quick release screw pin style
• Standard with spreader chains and banjo eye chainholders on rear post

Body Standard Features

• 6″ x 8.2 lb. structural channel long sills
• 3″ structural channel cross members 12 o.c.
• 10 ga. steel floor formed with inner side wall
• 12 ga. outer wall sides with box formed top and V-formed outside wall with two vertical braces
• 18″ cab shield, with brackets for side boards (various heights available)
• Rear posts 6″ higher than sides with brackets for side boards
• LED dump body light kit includes marker and clearance lights and 1 stop/turn/tail-light per rear corner post with wiring harness. Meets (FMVSS108)
• Available with 12″, 16″, 20″ or 24″ sides
• Standard width 96″ outside
• Inside width 863⁄4″
• Primed and painted black (other colors available)

Options

• 7″ x 14″ tailgate metering chute
• 36″ or 48″ cab shield
• Custom sizes and configurations available
• Dump Hoists — Electric or PTO
• Load tarps – manual or 12V

Tailgate Standard Features

• Constructed with 7 ga. steel
• Fully boxed frame with two 10 ga. horizontal and two 10 ga. vertical braces
• Standard height 10″ higher than sides
• Top pivot is bolt-in pin style
• Bottom has dump latch with release lever at driver’s side
• Standard with spreader chains and banjo eye chain holders on rear posts

Body Standard Features

• 7″ x 9.8 lb. structural channel long sills
• 4″ structural channel cross members 12 o.c.
• 7 ga. steel floor
• 7 ga. side walls with boxed tubing top rail and 10 ga. vertical braces
• 18″ cab shield, with brackets for side boards (various heights available)
• Rear posts 10″ higher than sides with brackets for side boards
• LED dump body light kit includes marker & clearance lights and one stop/turn/taillight per rear corner post with wiring harness. Meets (FMVSS108)
• Available with 24″, 30″, or 36″ sides
• Standard width 96″ outside
• Inside width 861⁄2″
• Primed and painted black (other colors available)

Options

• 123⁄8″ x 131⁄2″ tailgate metering chute
• 36″ or 48″ cab shield
• Custom sizes
• Dump hoists — electric or PTO
• Load tarps — manual or 12V
• Spreader apron

Alumnium Tailgate Standard Features

• Constructed with 3⁄16″ aluminum
• Fully boxed frame with two vertical posts
• Standard height — 6″ higher than sides
• Fully double-acting with bottom release lever at driver’s side, upper release is quick release screw pin style
• Standard with spreader chains and banjo eye chainholders on rear post

Body Standard Features

• 6″ x 8.2 lb. structural channel long sills
• 3″ structural channel cross members 12 o.c.
• 7 ga. steel floor formed with inner side wall
• 12 ga. outer wall sides with box formed top and V-formed outside wall with two vertical braces
• 36″ cab shield, with brackets for side boards (various heights available)
• Rear posts 6″ higher than sides with tall rear board pockets notched into rear post and 2″ lower than cab shield.
• LED dump body light kit includes marker and clearance lights and 1 stop/turn/tail/reverse light per rear corner post with wiring harness. Meets (FMVSS108)
• Available with 12″, 16″ or 20″ sides
• Standard width 96″ outside
• Inside width 863⁄4″
• Primed and painted black (other colors available)